Rezultate projekta predstavljaju razvijena  tehnička rešenja za korisnike,  publikacije za stručnu javnost, i organizovani  seminari i predavanja za široku javnost.

Tehnička rešenja

  1. Zoran Petrović, Miomir Vukićević, Branko Radičević i Mišo Bjelić, Aleksandra Petrović, Slobodan Todosijević, "Reverberaciona komora"  PDF
  2. Zlatan Šoškić, Zoran Petrović, Branko Radičević i Nebojša Bogojević, “Softver za proračun lokalnih mapa buke”  PDF
  3. Zoran Petrović, Miomir Vukićević, Branko Radičević i Mišo Bjelić, “Zvučna zaštita od industrijskih postrojenja u fabrici iverice u Ivanjici”  PDF
  4. Zoran Petrović, Branko Radičević, Nebojša Bogojević i Jelena Tomić, “Baza podataka o izvorima buke u urbanoj sredini  PDF
  5. Momir Praščević, Dragan Cvetković i Darko Mihajlov,”Akustičko zoniranje teritorije grada Niša”  PDF
  6. Momir Praščević, Dragan Cvetković i Darko Mihajlov, “NAISS model za proračun nivoa emisije buke drumskog saobraćaja u urbanim sredinama”  PDF

Publikacije

Radovi u međunarodnim časopisima (M20)

  1. Duško Minić, Milan Kolarević, Dragan Manasijević, Andreja Todorović, Dragana Živković, Nadežda Talijan, “Experimental investigation and thermodynamic calculations of the Ni–Sb–Zn phase diagram”, Materials Chemistry and Physics,  doi: 10.1016/j.matchemphys.2011.11.045
  2. Duško Minić, Ajka Aljilji, Milan Kolarević, Dragan Manasijević, Dragana Živković, "Mechanical and Electrical Properties of Alloys and Isothermal Section of Ternary Cu-In-Sb System at 673 K", High Temperature Materials and Processes. Volume 11(2011), Issue 1-2, Pages 131–138; ISSN (Online) 2191-0324, ISSN (Print) 0334-6455,  doi: 10.1515/HTMP.2011.019,
  3. V. Ćosović, D. Minić, D. Manasijević, M. Kolarević, N. Talijan, D. Živković, "Study of electrical conductivity and hardness of the alloys of ternary Bi–Sb–Zn system and calculation of isothermal section at 298 K", Kovove Materialy-Metallic Materials vol. 50 (2012), no. 3, pp. 161 - 167,  doi:10.4149/km_2012_3_161
  4. D. Minić, M. Kolarević, D. Manasijević, V. Ćosović, D Živković, N. Talijan, M. Marković, "Characterization of Alloys and Liquidus Projections of Ternary Bi-Sb-Sn system", High Temperature Materials and Processes. Volume 31, Issue 1, Pages 19–25, ISSN (Online) 2191-0324, ISSN (Print) 0334-6455,  DOI: 10.1515/htmp.2011.124, (2012)
  5. M Nešić, P Gušavac, M Popović, Z Šoškić and S Galović, “Thermal memory influence on the thermoconducting component of indirect photoacoustic response”, Physica Scripta, T149, 014018 (2012)  doi:10.1088/0031-8949/2012/T149/014018
  6. A Popović, Z Šoškić, Z Stojanović, D Čevizović and S Galović, “On the applicability of the effective medium approximation to the photoacoustic response of multilayered structures”, Physica Scripta, T149, 014066 (2012)  doi:10.1088/0031-8949/2012/T149/014066
  7. Nešić Mioljub, Popović Marica, Stojanović Zoran, Šoškić Zlatan, Galović Slobodanka, "Photoacoustic response of thin films: Thermal memory influence", Hemijska industrija, OnLine-First (00):52-52 (2012)  doi:10.2298/HEMIND120302052N
  8. M. Nešić, S. Galović, Z. Šoškić, M. Popović and D. M. Todorović, "Photothermal Thermoelastic Bending for Media with Thermal Memory", International Journal of Thermophysics, 33, 2203-2009 (2012)  doi: 10.1007/s10765-012-1237-6
  9. D. Minić, D. Čikara, M. Kolarević, D. Pršić, M. Premović, S. Milojević, "Alloy characterization of ternary Ni–Pb–Sb system", Metalugia international, 17(10)(2012)pp. 97-105  PDF
  10. Lukić Ljubomir, Djapić Mirko: "Machinability Parameters for Optimal Cutting Processes in Flexible Manufacturing Systems", Metalurgia International, Vol.17(2012) No.8, pp.10–17.  PDF
  11. Lukić Ljubomir, Djapić Mirko, Ivanović Slobodan, Petrović Aleksandra: "NC Post-Procesor Generator Model for Optimization of FMS Technologies", Metalurgia International, Vol.17 (2012) No.12, pp. 147-152  PDF
  12. V.Grković, M.Kolarević, M.Vukićević, M.Bjelić, Automatic Configuration of Modular Vault Walls, Facta Universitatis, Series Architecture and Civil Engineering, Vol 10, No 3, 2012, pp. 291-300,  doi: 10.2298/FUACE1203291G
  13. D. Minić, M. Premović, M. Kolarević, V. Ćosović, D. Manasijević, D. Živković, Description of the liquidus surface and characterization of alloys of the ternary Bi–Cu–In system,Journal of Materials Engineering and Performance,  doi: 10.1007/s11665-013-0493-3
  14. M. Praščević, D. Cvetković, D. Mihajlov, Z. Petrović, B. Radičević, Verification of NAISS Model for Road Traffic Noise Prediction in Urban Areas, Electronics and Electrical Engineering, Vol.19, No6, pp. 91-94,   doi: 10.5755/j01.eee.19.6.1294
  15. Zlatan Šoškić, Slobodanka Galović, Nebojša Bogojević, Slobodan Todosijević, "Static Component of Photothermal Response in Non-transparent Samples", Facta Univ. Ser.: Elec. Energ., vol. 25, No. 3, December 2012, pp. 213-224  doi: 10.2298/FUEE1203213S
  16. Sekulić D., Dedović V., Rusov S., Šalinić S.,Obradović A., Analysis of vibration effects on the comfort of intercity bus users by oscillatory model with ten degrees of freedom, Applied Mathematical Modelling, ISSN: 0307-904X, Volume 37, Issues 18–19, 1 October 2013, Pages 8629–8644
  17. Šalinić S., Obradović A., Mitrović Z.,Rusov S., On the brachistochronic motion of the Chaplygin sleigh, Acta Mechanica, ISSN 0001-5970,(2013), vol. 224 br. 9, str. 2127-2141
  18. Marković Goran, Gašić Milomir, Kolarević Milan, Savković Mile, Marinković Zoran: Application of the MODIPROM method to the final solution of logistics centre location, Transport 28(4). DOI:10.3846/16484142.2013.8643282013 (2013) pp 341-351
  19. Čović V., Mitrović Z., Rusov S., Obradović A., On the instability of equilibrium position of a mechanical system with singular constraints, ZAMM - Journal of Applied Mathematics and Mechanics, ISSN: 0044-2267, DOI: 10.1002/zamm.201200080
  20. Praščević Momir, Cvetković Dragan, Mihajlov Darko, Petrović Zoran, Radičević Branko: Verification of NAISS Model for Road Traffic Noise Prediction in Urban Areas, Elektronika ir elektrotechnika, Vol. 19, No. 6, 91-94, (2013)
  21. M. Praščević, D. Cvetković, D. Mihajlov, " Measurement and evaluation of the environmental noise levels in the urban areas of the city of Nis (Serbia)", Environmental Monitoring and Assessment, DOI 10.1007/s10661-013-3446-2, accepted: 14 September 2013
  22. Minić Duško, Premović Milena, Kolarević Milan, Ćosović Vladan, Manasijević Dragan, Živković Dragana: Description of the liquidus surface and characterization of alloys of the ternary Bi–Cu–In system,Journal of Materials Engineering and  Performance, Vol. 22, 2343-2350, (2013)
  23. Dervišević Irma, Minić Duško, Kolarević Milan, Kamberović Željko, Ristić Mirjana: Study on Properties of Alloys with Gallium, Antimony and Zinc from Recycling, Ecological Chemistry  and Engineering S., Vol. 20, No. 3, 579-599, (2013)
  24. Đapić Mirko, Lukić Ljubomir: Application of the Dempster-Shafer Theory in Conceptual Design of the Machining Centres, TEHNICKI VJESNIK-TECHNICAL GAZETTE, (2013), Vol. 20, No. 1, 65-71, (2013)
  25. Lukic Ljubomir,Đapić Mirko: The Study of Surface Rougness in Deep-Hole Drilling Processes, JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, Vol. 19 No. 2, 221-229, (2013)
  26. Đapić Mirko, Lukic Ljubomir, Popovic Predrag: Technical Product Risk Assessment Integration Into the Enterprise Risk Management, TEHNIČKI VJESNIK-TECHNICAL GAZETTE, Vol. 20, No. 4, 721-730, (2013)
  27. Šoškić Zlatan, Galović Slobodanka, Bogojević Nebojša, Todosijević Slobodan: Static Component Of Photothermal Response In Non-Transparent Samples - Facta universitatis-series: Electronics and Energetics,  Vol. 25, No. 3, 213-224, (2012)
  28. Šalinić S., Obradović A., Mitrović Z.,Rusov S., Brachistochrone with limited reaction of constraint in an arbitrary force field, erratum, Nonlinear Dynamics, ISSN 0924-090X, Vol. 70 br. 1, str. 891-892
  29. S. Galović, Z. Šoškić, M. Popović, D. Čevizović and Z. Stojanović, Theory of photoacoustic effect in media with thermal memory, J. Appl. Phys. 116, 024901 (2014), pp. 024901-1 - 024901-12, ISSN: 0021-8979,  doi: 10.1063/1.4885458
  30. M. Praščević, D. Cvetković, D. Mihajlov, „Measurement and evaluation of the environmental noise levels in the urban areas of the city of Nis (Serbia)“, Environmental Monitoring and Assessment, Vol. 186, Issue 2, pp. 1157-1165, 2014, ISSN 0167-6369,  doi: 10.1007/s10661-013-3446-2
  31. Nebojsa Bogojevic and Vojkan Lucanin, The proposal of validation metrics for the assessment of the quality of simulations of the dynamic behaviour of railway vehicles, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit,  doi: 10.1177/0954409714552700
  32. B. Cvetanović, D. Cvetković, M. Ristić, A. Milošević, Application of 3×3 Matrix Method in the Estimating of Risk of Vibrations Generated During the Use of Agriculture Tractors, Journal of Environmental Protection and Ecology 15, No 2, 750–757 (2014), pp 750-757, ISSN 1311-5065,  PDF at publisher website
  33. Šalinić Slaviša, Obradović Aleksandar, Rusov Srđan, Mitrović Zoran, Stokić Zoran, „Optimization of gravity flow discharge chutes under the speed dependent resisting forces: Maximizing exit velocity“, Powder Technology, (2015), vol. 273 br. , pp. 203-209, ISSN 0032-5910,  doi:10.1016/j.powtec.2014.12.051
  34. Bjelić M., Kovanda K., Kolařík L., Vukićević M., Radičević B., Numerical modeling of two-dimensional heat-transfer and temperature-based calibration using simulated annealing optimization method: Application to gas metal arc welding, Thermal Science, 2015, Online-first, vol. 00, p. 127,  doi:10.2298/TSCI150415127B
  35.  D. Mihajlov, M. Praščević, „Permanent and Semi-permanent Road Traffic Noise Monitoring in the City of Nis (Serbia)“, Journal of Low Frequency Noise, Vibration and Active Control, Vol. 34, No. 3, pp. 251-268, DOI:  doi: 10.1260/0263-0923.34.3.251, 2015
  36. Slobodan Z. Todosijević, Zlatan N. Šoškić, and Slobodanka P. Galović, "A combination of frequency photoacoustic and photoacoustic spectroscopy techniques for measurement of optical and thermal properties of macromolecular nanostructures", Optical and Quantum Electronics 48, no. 5: 1-7 (2016)  doi: 10.1007/s11082-016-0571-5
  37. Zlatan Šoškić, Snežana Ćirić-Kostić and Slobodanka Galović, "An extension to the methodology for characterization of thermal properties of thin solid samples by photoacoustic techniques", International Journal of Thermal Sciences 109, pp.217-230 (2016)  doi:10.1016/j.ijthermalsci.2016.06.005
  38. Croccolo, D., De Agostinis, M., Fini, S., Olmi, G., Bogojevic, N., Ćirić-Kostić, S.: „Effects of build orientation and thickness of allowance on the fatigue behaviour of 15–5 PH stainless steel manufactured by DMLS“, Fatigue and Fracture of Engineering Materials and Structures, 2017;1–17,  DOI: 10.1111/ffe.12737, ISSN: 8756-758X , IF(2016): 2.335 - M21
  39. Todosijević S, Šoškić Z, Stojanović, Z, Galović, S.: „Analysis of the Measurement System and Optimization of the Measurement Procedure for Detection of Thermal Memory Effects by Photoacoustic Experiments“, International Journal of Thermophysics (2017) Vol. 38, no 5, p. 72,  doi: 10.1007/s10765-017-2215-9, ISSN: 0195-928X IF(2015):0.946 – M23
  40. Kalentics,N., Boillat, E., Peyre, P., Ćirić-Kostić, S., Bogojevic, N., Log, R.E.: „Tailoring residual stress profile of Selective Laser Melted parts by Laser Shock Peening“, Additive Manufacturing, Volume 16, August 2017, 90-97,  DOI: 10.1016/j.addma.2017.05.008, ISSN: 2214-8604 - некатегорисан међународни часопис реферисан у WoS
  41. Croccolo, D., De Agostinis, M., Fini, S., Olmi, G., Bogojevic, N., Ciric-Kostic, S.: „Effects of build orientation and thickness of allowance on the fatigue behaviour of 15–5 PH stainless steel manufactured by DMLS“, Fatigue and Fracture of Engineering Materials and Structures (2018) 41:900–916,  DOI: 10.1111/ffe.12737, ISSN: 8756-758X, IF(2017): 2,533, M21
  42. Croccolo, D., De Agostinis, M., Fini, S., Olmi, G., Robusto, F., Ćirić Kostić, S., Vranić, A. and Bogojević, N.: Fatigue Response of As-Built DMLS Maraging Steel and Effects of Aging, Machining, and Peening Treatments, Metals, (2018), Volume 8, Number 7, p.505,  https://doi.org/10.3390/met8070505, ISSN 2075-4701) IF(2017: 1.704 - M22
  43. Djordjevic Aleksandar J  Premovic Milena M  Minic Dusko M  Cosovic Vladan R  Zivkovic Milutin  Manasijevic Dragan M  Kolarevic M., „Experimental Evaluation of 300 degrees C section of Cu-In-Ni Phase Diagram, Hardness and Electrical Conductivity of Selected Alloy“, Materials Research-Ibero-American Journal Of Materials, (2018), vol. 21 br. 3, str. -, ISSN 1516-1439,  DOI: 10.1590/1980-5373-mr-2017-0699, IF(2017): 1,103 - M23
  44. Goran Miodragović, Violeta Ðorđević, Radovan Bulatović and Aleksandra Petrović: "Optimization of multi-pass turning and multi-pass face milling using subpopulation firefly algorithm", Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science (2018),  DOI: 10.1177/0954406218774378, IF(2017): 0,996 - M23
  45. Miomir Vukićević, Mišo Bjelić, Dragan Milčić, Miroslav Mijajlović, Marina Pljakić: „Analytical algorithm expressions in simulation of the temperature field in electric resistance spot welding“, Technical Gazette, Vol.25, No.1(2018), 64-71,  doi:10.17559/TV-20160225102519, ISSN 1330-3651, IF(2017): 0,686 – M23
  46. Tomić J., Bogojević N., Šoškić Z. (2018), „Application of Artificial Neural Network to Prediction of Traffic Noise Levels in the City of Niš, Serbia“. In: Herisanu N., Marinca V. (eds) Acoustics and Vibration of Mechanical Structures—AVMS-2017. Springer Proceedings in Physics, vol 198. pp. 91-98, Springer, Cham, DOI:  https://doi.org/10.1007/978-3-319-69823-6_11, ISBN 978-3-319-69823-6 – некатегорисан међународни часопис реферисан у WoS
     

Radovi na međunarodnim konferencijama (M30)

  1. Giangiacomo Minak, Zlatan Šoškić, Ana Pavlović, Cristiano Fragassa, “Characterization of impact behavior of composite car components “, Proceedings of XXIII International Automotive Conference with Exhibition “Science and Motor Vehicles 2011″, 19-21 of April 2011, Belgrade, Serbia, paper No. NMV11AETT03,  PDF
  2. Giangiacomo Minak, Zlatan Šoškić, Snežana Ćirić Kostić, Cristiano Fragassa, “Analysis of an Automatic Wrapping Machine: Numerical Models and Experimental Results”, Proceedings of The 7th International Scientific Conference “Research and Development of Mechanical Elements and Systems”, 27th & 28th of April 2011, Zlatibor, Serbia, p.69,  PDF
  3. M. Praščević, D. Cvetković, D. Mihajlov, „A framework for strategic noise mapping in urban areas“, In proc. of the XI-th Sumposium „Acoustics and Vibration of Mechanical Structures AVMS-2011“, pp. 7-22, Timisoara, 2011
  4. D. Mihajlov, M. Praščević, D. Cvetković, „Acoustic treatment of machine workroom for staples production“, In proc. of the XI-th Sumposium „Acoustics and Vibration of Mechanical Structures AVMS-2011“, pp. 37-46, Timisoara, 2011,  PDF
  5. Zlatan Šoškić, Zoran Petrović, Branko Radičević and Snežana Ćirić Kostić, “Spectral Analysis of Machine Vibrations in Conditions of Heavy Data Transmission Losses”, Proceedings of XI Symposium “Acoustics and Vibration of Mechanical Structures AMVS 2011″, 26th May 2011, Timisoara (Romania) p.55-62, PDF
  6. Zoran Petrović, Branko Radičević, Zlatan Šoškić and Momir Praščević, “Noise Protected Buildings”, Proceeedings of The Seventh International Triennial Conference “Heavy Machinery-HM 2011″, Vrnjačka Banja, June 29th – July 2nd 2011, Volume 7, No 6, p.81-86, PDF
  7. Bojan Tatić, Nebojša Bogojević, Zlatan Šoškić and Zoran Petrović, “Railway Vehicles As The Source of the Noise in the Urban Areas”, Proceeedings of The Seventh International Triennial Conference “Heavy Machinery-HM 2011″, Vrnjačka Banja, June 29th – July 2nd 2011, Volume 7, No 6, p.71-80, PDF
  8. Nebojša Bogojević, Per-Anders Jönnson, Sebastian Stichel, “Iron Ore Transportation Wagon with Three-Piece Bogies – Simulation Model and Validation”, Proceedings of The Seventh International Triennial Conference “Heavy Machinery-HM 2011″, Vrnjačka Banja, June 29th – July 2nd 2011, No 6, p.35-38
  9. Aleksandra Petrović, Miodrag Manić, Branko Radičević and Zlatan Šoškić, “Application Possibilities Of Artificial Intelligence Methods In Design For Assembly”, Proceeedings of The Seventh International Triennial Conference “Heavy Machinery-HM 2011″, Vrnjačka Banja, June 29th – July 2nd 2011, Volume 7, No 5, p.49-54, PDF
  10. Zlatan Šoškić, Snežana Ćirić Kostić, Nebojša Bogojević and Asti Radovani, “Determination of working regime during experimental investigations of rotational machines”, Proceeedings of The Seventh International Triennial Conference “Heavy Machinery-HM 2011″, Vrnjačka Banja, June 29th – July 2nd 2011, Volume 7, No 4, p.75-80, PDF
  11. M. Kolarević, M. Vukićević, B. Radičević, M. Bjelić, V. Grković: A Methodology For Forming The Regression Model Of Ternary System, The Seventh Triennial International Conference Heavy Machinery HM 2011, Faculty Of Mechanical Engineering, Proceedings, Vrnjačka Banja, pp Е 1-6, 29 june-2 july 2011, PDF
  12. M. Vukićević, M. Bjelić, M. Kolarević, A. Petrović: Comparison Of Conventional And Robotic Workplace Based On Economic And Production Indicators, The Seventh Triennial International Conference Heavy Machinery HM 2011, Faculty Of Mechanical Engineering, Proceedings, Vrnjačka Banja, pp Е 7-12, 29 june-2 july 2011 , PDF
  13. M. Bjelić, M. Vukićević, M. Kolarević, A. Petrović: Numerical Simulation Of Welding Parameters Influence On Temperature Field During Gmaw Welding, The Seventh Triennial International Conference Heavy Machinery HM 2011, Faculty Of Mechanical Engineering, Proceedings, Vrnjačka Banja, pp Е 13-16, 29 june-2 july 2011 , PDF
  14. D. Minić, M. Kolarević, M. Premović, M. Marković: Thermodynamic Calculation Of The Bi-In-Sb Phase Diagram, The Seventh Triennial International Conference Heavy Machinery HM 2011, Faculty Of Mechanical Engineering, Proceedings, Vrnjačka Banja, pp G 43-47, 29 june-2 july 2011
  15. M. Praščević, D. Cvetković, D. Mihajlov, „NAISS model validation based on measured data of noise monitoring“, Proc. of the VII Triennial International Coference „Heavy Machinery HM 2011“, Vrnjačka banja, 2011, Vol 7, No 6, pp 35-38.
  16. D. Cvetkovic, M. Praščević, D. Mihajlov, „Estimation of uncertainty in environmental noise measurement“, In proc. of the VII Triennial International Coference „Heavy Machinery HM 2011“, Vrnjačka banja, 2011, Vol 7, No 6, pp 39-44.
  17. Branko Radičević, Zoran Petrović, Slobodan Ivanović and Margarita Georgieva, “Calculation of failure criticality in Reliability – Centred Maintenance”, Proceedings of The Seventh International Triennial Conference “Heavy Machinery – HM 2011″, Vrnjačka Banja, June 29th – July 2nd 2011, pp E 17-23
  18. Nenad Nikolić, Ljubomir Lukić, Mirko Đapić, Goran Stojanović, Zvonko Petrović, ” Computer Integrated Production Technologies”, Proceeedings of The Seventh International Triennial Conference “Heavy Machinery-HM 2011″, Vrnjačka Banja, June 29th – July 2nd 2011, No 5, p.67-72
  19. Nebojša Bogojević, Babette Dirks, Sebastian Stichel, Per-Anders Jönnson, “Dynamic behaviour of freight wagons with three-piece bogie on Swedish iron ore line”, Proceedings of the 22nd International Symposium on Dynamics on Roads and Tracks IAVSD ’11, Manchester, 14-19 August 2011, article No. 42.4
  20. M. Kolarević, D. Minić, M.Rajović, M. Bjelić, Z.Petrović: Special Cubic Model For Multiple Regression In Triangular Coordinates, International Conference Mathematical and Informational Technologies MIT 2011, Vrnjačka Banja 27.8-31.8. 2011., pp 191-197  PDF
  21. M. Kolarević, B.Radičević, M.Vukićević, M.Bjelić, Lj. Cvetković: “Improving Product Quality of Security Equipment Using SPC”, 34th International Conference On Production Engineering, Niš 28-30.September 2011, pp. 151-154,  PDF
  22. M.Praščević, D. Cvetković, D. Mihajlov, Z. Petrović, “On acoustic tests of the Mosquito high frequency sound deterrent device”, Proceedings of International conference “Safety of technical safety in living and working environement”, Niš, October 27th-28th 2011, p.233-238
  23. Lukić Ljubomir, Djapić Mirko: Railway Transport of 725 MVA Power Transformer, Proc. XV International Scientific-Expert Conference on Railways RAILCON'12, October 04-05, 2012, Niš, 2012., pp.253-256.
  24. Zlatan Šoškić, Zoran Petrović, Dragan Cvetković and Srđan Rusov: "Development of methodologies and means for noise protection of urban areas – project description", 23rd National and 4th International Conference "Noise and Vibrations", Niš 17-19. October 2012, pp. 15-20,  PDF
  25. Momir Praščević, Dragan Cvetković, Darko Mihajlov, Nikola Holoček: "The acoustic zoning - a comparasion of legislation and experiences in Italy and Serbia", 23rd National and 4th International Conference "Noise and Vibrations", Niš 17-19. October 2012, pp. 21-28,  PDF
  26. D. Mihajlov, M. Praščević, D. Cvetković „An analysis of the environmental noise levels on the territory of the city of Niš“, 23rd National and 4th International Conference "Noise and Vibrations", Niš 17-19. October 2012, pp. 49-58
  27. Marina Pljakić, Branko Radičević, Jelena Tomić, Zvonko Petrović: "Analysis of systematic measurements of noise in cities", 23rd National and 4th International Conference "Noise and Vibrations", Niš 17-19. October 2012, pp. 59-62,  PDF
  28. Branko Radičević, Zoran Petrović, Slobodan Todosijević, Zvonko Petrović: "Design of noise protection of industrial plantscase-Study of a plywood factory", 23rd National and 4th International Conference "Noise and Vibrations", Niš 17-19. October 2012, pp. 71-75,  PDF
  29. Zoran Petrović, Branko Radičević, Zvonko Petrović, Nebojša Zdravković: "Design of noise protection in urban areas-case study of an elementary school", 23rd National and 4th International Conference "Noise and Vibrations", Niš 17-19. October 2012, pp. 77-81,  PDF
  30. Vladan Grković, Milan Kolarević, Zvonko Petrović, Miomir Vukićević: "Morphology of modular traffic noise barriers", 23rd National and 4th International Conference "Noise and Vibrations", Niš 17-19. October 2012, pp. 89-94,  PDF
  31. Milan Kolarević, Vladan Grković, Miomir Vukićević, Mišo Bjelić: "Configuration of modular noise barriers", 23rd National and 4th International Conference "Noise and Vibrations", Niš 17-19. October 2012, pp. 95-100,  PDF
  32. Mišo Bjelić, Miomir Vukićević, Aleksandra Petrović, Marina Pljakić: "Analysis of Materials Used for Production of Noise Protection Barriers", 23rd National and 4th International Conference "Noise and Vibrations", Niš 17-19. October 2012, pp. 101-103,  PDF
  33. Jelena Tomić, Nebojša Bogojević, Bojan Tatić, Zlatan Šoškić: "Design and implementation of on−line database of noise sources", 23rd National and 4th International Conference "Noise and Vibrations", Niš 17-19. October 2012, pp. 225-228,  PDF
  34. Bojan Tatić, Nebojša Bogojević, Slobodan Todosijević, Zlatan Šoškić: "Analysis of noise level generated by helicopters with various numbers of blades in the main rotor", 23rd National and 4th International Conference "Noise and Vibrations", Niš 17-19. October 2012, pp. 249-253,  PDF
  35. Ljubomir Lukić, Mirko Đapić, Dusica Lukić, Aleksandra Petrović: "Aspects of design of power transformers for noise reduction", 23rd National and 4th International Conference "Noise and Vibrations", Niš 17-19. October 2012, pp. 255-262,  PDF
  36. Aleksandra Petrović, Ljubomir Lukić, Milan Kolarević, Dušica Lukić: "Noise measurements of the power transformers", 23rd National and 4th International Conference "Noise and Vibrations", Niš 17-19. October 2012, pp. 263-267,  PDF
  37. Zoran Petrović, Marina Pljakić i Jelena Tomić, "Application of Neural Networks for Calculating of Intensity of Trafic Noise Sources" Proceedings of International Conference on Acoustics, AIA-DAGA 2013, 18-21 March 2013, Merano (Italy), pp. 2293,  PDF
  38. Šoškić, Z., Tomić, J., Bogojević, N., Ćirić-Kostić, S.: “Influence of Heavy Data Transmission Losses on Spectra of Signals”, Proceedings of XII Symposium "Acoustics and Vibration of Mechanical Structures AMVS 2013", 2013, Timisoara (Romania)
  39. Ivaylo Topalov, Branko Radičević, Bojan Tatić, Zlatan Šoškić, Noise Mapping In Area Of An Urban Overpass, 35 th International Conference on Production Engineering, Kraljevo-Kopaonik, 25-28 September 2013
  40. Slobodan Todosijević, Slobodanka Galović, Jelena Tomić, Zlatan Šoškić, Application Of Photoacoustic Techniques For Characterization Of Materials, 35 th International Conference on Production Engineering, Kraljevo-Kopaonik, 25-28 September 2013
  41. M.Kolarević, D.Minić, M.Rajović, V.Grković, Zv.Petrović, Selection of the Optimal Mathematical Model of Multiple Regression in the Ternary Mixture Experiments, International Conference Mathematical and Informational Technologies MIT 2013, Vrnjačka Banja 05.09.2013.-09.09.2013., Društvo matematičara KIM, Institute of Computational T?chnologies Siberian Branch of the Russian Academy of Sciences, Beograd, 2013
  42. Milan Kolarević, Vladan Grković, Branko Radičević, Zvonko Petrović, Model for Optimization of Phase Process by the Linear Programming Method, 35 th International Conference on Production Engineering, Kraljevo-Kopaonik, 25-28 September 2013
  43. Vladan Grković, Zvonko Petrović, Milan Kolarević, Branko Radičević, Application of the Triangular Coordinate System for Creation of Plane and Spatial Ternary Graphs, 35 th International Conference on Production Engineering, Kraljevo-Kopaonik, 25-28 September 2013
  44. Zoran Petrović, Miomir Vukićević, The Industry Of Kraljevo And The Surroundings – Its Past And Future, 35 th International Conference on Production Engineering, Kraljevo-Kopaonik, 25-28 September 2013
  45. Aleksandra Petrović, Ljubomir Lukić, Mišo Bjelić, Marina Pljakić, Optimal Tool Path Modeling In Contour Milling Process, 35 th International Conference on Production Engineering, Kraljevo-Kopaonik, 25-28 September 2013
  46. Zvonko Petrović, Ljubomir Lukić, Mirko Đapić, Aleksandra Petrović, Development Of The Program To Prepare Tool Sets In Flexibile Manufacturing System, 35 th International Conference on Production Engineering, Kraljevo-Kopaonik, 25-28 September 2013
  47. Slobodan Ivanović, Ljubomir Lukić, Zoran Petrović, Goran Miodragović, Software Structure Of The Postprocessor Generator Of Nc Programs In Flexible Manufacturing System, 35 th International Conference on Production Engineering, Kraljevo-Kopaonik, 25-28 September 2013
  48. Ljubomir Lukić, Aleksandra Petrović, Dušica Lukić, Design Of A Delta Wound Core Transformer With Noise Reduction, 35 th International Conference on Production Engineering, Kraljevo-Kopaonik, 25-28 September 2013
  49. Nicolae Herisanu, Branko Radičević, Zoran Petrović, Vladan Grković, Sound Insulation Of A Plywood Transporter, 35 th International Conference on Production Engineering, Kraljevo-Kopaonik, 25-28 September 2013
  50. Zoran Petrović, Marina Pljakić and Jelena Tomić, Application of Neural Networks for Calculation of Intensity of Traffic Noise Sources, International Conference on Acoustics, AIA-DAGA 2013, 18 - 21 March 2013 in Merano, Italy, pp. 2293-2296
  51. Miomir Vukićević, Bojana Veličković, Marija Marković, Imrich Lukovics, Mišo Bjelić, Preparation of coated steel sheets for welding, The 2nd International Conference “Mechanical Engineering in the XXI Century”, Niš, 2013, pp. 239-242
  52. Mišo Bjelić, Miomir Vukićević, Sava Đurić, Marija Marković, Development of simulation models in welding, The 2nd International Conference “Mechanical Engineering in the XXI Century”, Niš, 2013, pp. 243-256
  53. Mišo Bjelić, Miomir Vukićević, Marina Pljakić, Simulation of the Temperature Field in the Wire During GMA Welding, 35th International Conference on Production Engineering, Kraljevo-Kopaonik, 25-28 September 2013
  54. Mirko Đapić, Ljubomir Lukić, Uncertainty Modeling In The Technical Product Risk Assessment, 35 th International Conference on Production Engineering, Kraljevo-Kopaonik, 25-28 September 2013
  55. Marina Pljakić, Jelena Tomić, Mišo Bjelić, Noise Protection In Manufacturing Plants, 35 th International Conference on Production Engineering, Kraljevo-Kopaonik, 25-28 September 2013
  56. Minak, G., Pantović, S.,Bogojević, N., Ćirić-Kostić, S.: “Influence of a Building Parameters of the Accuracy of the Shape and Dimension of Parts Produced by SLS”, Proceedings of 35th International Conference On Production Engineering, 2013., Kraljevo, Serbia
  57. S. Hossein Nia, P.A. Jönsson, S. Stichel, T. Nordmark &N. Bogojevic, Can Simulation Help To Find The Sources Of Wheel Damages? Investigation Of Rolling Contact Fatigue On The Wheels Of A Three-Piece Bogie On The Swedish Iron Ore Line Via Multibody Simulation Considering Extreme Winter Condition, 10th International Heavy Haul Association Conference, New Delhi, India February 4-6, 2013
  58. Dobrinka Atmadzhova, Nebojša Bogojević, Branko Radičević, A RCM Analysis Of The Railway Bogie, 35th International Conference on Production Engineering, Kopaonik 2013., Kraljevo, Serbia
  59. S. Rusov, N. Mladenović, Z.Mitrović ., POSSIBILITY OF CONTACT FORCE OPTIMIZATION AND AERODYNAMIC NOISE REDUCTION ON OVERHEAD EQUIPMENT,Forth Serbian (29th Yu) Congress on Theoretical and Applied Mechanics,Vrnjačka Banja, Serbia, 4-7 June 2013
  60. M. Praščević, A, Gajicki, D. Mihajlov, N. Živković, Lj. Živković, „Application of the prediction model "SCHALL 03" for railway noise calculation in Serbia, Applied Mechanics and Materials Vol. 430, pp 237-243, 2013
  61. M. Praščević, D. Mihajlov, A, Gajicki, D. Cvetković, N. Holeček, „Acoustic zoning and noise assessment" for railway noise calculation in Serbia, Applied Mechanics and Materials Vol. 430, pp 244-250, 2013
  62. Nebojša Bogojević, Jelena Tomić, Slobodan Todosijević, Vojkan Lučanin, VALIDATION OF A RAILWAY VEHICLE MODEL BASED ON COMPARISON OF CUMULATIVE DISTRIBUTION FUNCTIONS, Proceedings of the 8th International Conference Heavy Machinery HM 2014, Zlatibor,24-26.06.2014, pp. F 69-76, ISBN 978-86-82631-74-3,  PDF
  63. Marina Pljakić , Miomir Vukićević, Milan Kolarević, Mišo Bjelić, Recognizing MAG Process Parameters on the Basis of the Sound Emitted, Proceedings of the 8th International Conference Heavy Machinery HM 2014, Zlatibor, 24-26.06.2014, pp. B 37-42, ISBN 978-86-82631-74-3,  PDF
  64. Zoran Petrović, Zlatan Car, Branko Radičević, Leon Šikulec, Vladan Grković, Implementation of the RCM Methodology on the Example of City Waterworks, Proceedings of the 8th International Conference Heavy Machinery HM 2014, Zlatibor, 24-26.06.2014, pp. B 69-78, ISBN 978-86-82631-74-3,  PDF
  65. Ljiljana Pecić , Milan Kolarević, Marketing Oriented Organizational Culture as Prerequisite for TQM Implementation: The Case Study of Serbian Mechanical Industry, Proceedings of the 8th International Conference Heavy Machinery HM 2014, Zlatibor24-26.06.2014, pp. B 27-35, ISBN 978-86-82631-74-3,  PDF
  66. Slobodan Todosijević, Slobodanka Galović, Jelena Tomić, Zlatan Šoškić, Developing model of a photoacoustic measurement system, Proceedings of the 8th International Conference Heavy Machinery HM 2014, Zlatibor, 24-26.06.2014, pp. G 45-50, ISBN 978-86-82631-74-3,  PDF
  67. Mišo Bjelić, Karel Kovanda, Ladislav Kolařík, Marie Kolaříková, Petr Vondrouš , Modeling and numerical analysis of wire temperature in GMA welding, Proceedings of the 8th International Conference Heavy Machinery HM 2014, Zlatibor, 24-26.06.2014, pp. B 79-82, ISBN 978-86-82631-74-3,  PDF
  68. Ljubomir Lukić, Mirko Djapić, Aleksandra Petrović, Veda Kilibarda, New Concept of Multi-Agent CAPP System in Inteligent Manufacturing Systems, Proceedings of the 8th International Conference Heavy Machinery HM 2014, Zlatibor, 24-26.06.2014, pp. B 7-12, ISBN 978-86-82631-74-3,  PDF
  69. Milan Kolarević, Vladan Grković , Nenad Kolarević , Zvonko Petrović , Miloje Rajović, Application of Sub Matrixes for Phase Process Optimization of Linear Programming, Proceedings of the 8th International Conference Heavy Machinery HM 2014, Zlatibor, 24-26.06.2014, pp. B 43-48, ISBN 978-86-82631-74-3,  PDF
  70. Aleksandra Petrović, Ljubomir Lukić, Marina Pljakić, Machining Parameters Influence on Cutting Force Used for Tool Path Optimizafzion in End Milling, Proceedings of the 8th International Conference Heavy Machinery HM 2014, Zlatibor, 24-26.06.2014, pp. B 19-25, ISBN 978-86-82631-74-3,  PDF
  71. Jelena Tomić, Zlatan Šoškić, Nebojša Bogojević, Slobodan Todosijević, "A Simplified Method for Data Processing of Signals With Heavy Data Transmission Losses", The Eighth lnternational Triennial Conference Heavy Machinery – HM2014, Zlatibor, June 25 - June 28 2014., pp. G.55-59, ISBN 978-86-82631-74-3,  PDF
  72. Jelena Tomić, Slobodan Todosijević, Nebojša Bogojević, Zlatan Šoškić, "Methodology for verification of software for noise attenuation calclation according to the ISO 9613-2 standard", 24th International conference Noise and Vibration, Niš, October 29 - 31, 2014., pp. 27-33, ISBN: 978-86-6093-062-2,  PDF
  73. Momir Prašćević, Darko Mihajlov, Dragan Cvetković, PERMANENT AND SEMI-PERMANENT NOISE MONITORING - FIRST RESULTS IN THE CITY OF NIS, Proceedings of the 24th International Conference Noise and Vibration, Niš 29-31, Oktober 2014, pp.33-40, ISBN 978-86-6093-062-2,  PDF
  74. Darko Mihajlov, Momir Praščević, Aleksandar Gajicki, ASSESSMENT OF HARMFUL HEALTH IMPACT OF ENVIRONMENTAL NOISE, Proceedings of the 24th International Conference Noise and Vibration, Niš 29-31, Oktober 2014, pp.51-54, ISBN 978-86-6093-062-2,  PDF
  75. Milan Kolarević , Branko Radičević , Vladan Grković , Zvonko Petrović, ONE REALIZATION OF THE SYSTEM FOR MEASURING AIRFLOW RESISTANCE, Proceedings of the 24th International Conference Noise and Vibration, Niš 29-31, Oktober 2014, pp.123-128, ISBN 978-86-6093-062-2,  PDF
  76. Zoran Petrović, Branko Radičević, Milan Kolarević, Vladan Grković, SOUND INSULATION OF A MECHANICAL WORKSHOP, Proceedings of the 24th International Conference Noise and Vibration, Niš 29-31, Oktober 2014, pp.135-140, ISBN 978-86-6093-062-2,  PDF
  77. Ninoslav Zuber, Rusmir Bajrić, Dragan Cvetković, VIBRATION FEATURE EXTRACTION METHODS FOR GEAR FAULTS DIAGNOSIS -A REVIEW, Proceedings of the 24th International Conference Noise and Vibration, Niš 29-31, Oktober 2014, pp.141-145, ISBN 978-86-6093-062-2,  PDF
  78. Ljubomir Lukić, Mirko Djapić, Predrag Popović, Aleksandra Petrović, Risk Management in Power Transformators Manufacturing, Proc. 9th International Quality Conference, June 04-06, Kragujevac, 2015, pp. 61-64, ISBN 978-86-6335-015-1
  79. Aleksandra Petrović, Slobodan Ivanović, Ljubomir Lukić, Generating Parameters from the NC Code Needed for Defining the Optimal Tool Path, Proceedings 12th International Scientific Conference MMA 2015 Flexible Technologies, September 25-26, Novi Sad, 2015, pp. 157-160.
  80. Saša Prodanović, Novak Nedić, Ljubomir Lukić, Possibilities for Disturbance Rejection in the Decoupled Tito Process, Proceedings 12th International Scientific Conference MMA 2015 Flexible Technologies, September 25-26, Novi Sad, 2015, pp. 71-. Pavlović Nataša: Realia and Real-Life Situations, III International Conference LANGUAGE FOR SPECIFIC PURPOSES: Past, Present, Future, Belgrade, Serbia 26-27 September 2014
  81. N. Nedić, Lj. Lukić, D. Pršić, V. Stojanović, D. Dubonjić, (2015), Analysis and Simulation of Stewart Platform Manipulator Behavior Driven by Pneumatic Cylinders Applied in Wood Processing, 8. International Congress of Croatian Society of Mechanics, 29 September –2 October 2015, Opatija
  82. Lj. Lukić, N. Nedić, D. Pršić, Z. Petrović, (2015), NC Programming System for Interpolation of Tools' Circular Trajectories during Multi-axis Wood Machining, 8. International Congress of Croatian Society of Mechanics, 29 September –2 October 2015, Opatija
  83. S. Prodanović, N. Nedić, Lj. Lukić, (2015), Possibilities for Disturbance Rejection in the Decoupled TITO Process, 12th International Scientific Conference MMA 2015 - Flexible Technologies, Andrevlje, Serbia, 2015., pp. 71-74, ISBN 978-86-7892-722-5.
  84. Croccolo D., De Agostinis M., Fini S., Olmi G., Vranić A., Ćirić Kostić S.: Influence of the Growth Angle on the Fatigue Strength of EOS Maraging Steel Produced by Additive Metal Machine, Proceedings M2D2015 6th International Conference on Mechanics and Materials in Design, Ponta Delgada Azores, Portugal, 26-30 July 2015, 2015, pp. 235 – 244.
  85. Croccolo, D., De Agostini, M., Fini, S., Olmi, G., Vranić, A., Ćirić-Kostić, S.: “An experimental study on the fatigue response of 15-5 PH stainless steel built by DMLS”, IX International Conference “Heavy Machinery-HM2017”, Zlatibor, 28.June-1.July 2017, pp. P9-16, ISBN 978-86-82631-89-7 - M33
  86.  Aleksandra Petrović, Slobodan Ivanović, Goran Miodragović, Vladan Grković: „Application of Multicriteria Decision Making in Selection of Optimal Toolpath“, IX International Conference “Heavy Machinery-HM 2017”, 28 June – 1 July 2017, Zlatibor, B.13 – B.18, ISBN 978-86-82631-89-7 - M33
  87. N. Pavlović, Oral Presentations of Companies in ESP Classes as a Multi-Purpose Task, Heavy Machinery-HM2017, pp. B.57-B.62, June 28-July 1, 2017, Zlatibor (Serbia), ISBN: 978-86-82631-89-7 - M33
  88. Ljiljana Pecić, Milan Kolarević, Vladan Grković, Nataša Obradović: „The Influence of Working Experience and Level of Education on the Market Orientation of SMEs in Transition“, IX International Conference “Heavy Machinery-HM 2017”, 28 June – 1 July 2017, Zlatibor, B.37 – B.44, ISBN 978-86-82631-89-7 - M33
  89. Slobodan Ivanović, Aleksandra Petrović, Ljubomir Lukić, Marina Pljakić: „3D Animation of Workpiece Transformation During Milling Operation“, Proc. IX Triennial International Conference Heavy Maxhinery – HM 2017, June 28 – July 1 2017, Zlatibor, Serbia, B.69-B.74. ISBN 978-86-82631-89-7 - M33
  90. Ljubomir Lukić, Slobodan Ivanović, Aleksandra Petrović, Mirko Đapić: „Optimization Model for Machining Processes Design in Flexible Manufacturing Systems“, Proc. IX Triennial International Conference Heavy Maxhinery – HM 2017, June 28 – July 1 2017, Zlatibor, Serbia, B.75-B.82. ISBN 978-86-82631-89-7 - M33
  91. Zvonko Petrović, Mirko Đapić, Ljubomir Lukić: „Application of Axiomatic Design Theory and Belief Function Theoru in the Assembly System Improvement“, Proc. IX Triennial International Conference Heavy Machinery – HM 2017, June 28 – July 1 2017, Zlatibor, Serbia, B.83-B.88. ISBN 978-86-82631-89-7 - M33
  92. Nebojša Bogojević, Aleksandar Vranić, Nusret Muharemović, Nenad Drvar, “Surface Quality of Maraging Steel Parts Produced by DMLS”, IX International Conference “Heavy Machinery-HM 2017”, Zlatibor, 28 June – 1 July 2017, D.21 - D.26, ISBN 978-86-82631-89-7 – M33
  93. Ćirić-Kostić, S., Bogojevic, N., Vranić, A., Croccolo, D., De Agostini, M., Fini, S., Olmi, G.: “Machining and heat treatment effects on the fatigue properties of Maraging steel produced by DMLS”, IX International Conference “Heavy Machinery-HM2017”, Zlatibor, 28.June-1.July 2017, pp. D27-D36, ISBN 978-86-82631-89-7 - M33
  94. Zlatan Šoškić, Simona Montanari, Gian Luca Monti, Michele Monti, "A Heuristic Approach to the Estimation of Mass of the Waste Powder During Selective Laser Sintering of Polyamide PA2200", The Ninth International Triennial Conference Heavy Machinery - HM2017, Zlatibor, June 28 - July 1 2017, pp. D.37-44, ISBN 978-86-82631-89-7 – M33
  95. Jelena Tomić, Nebojša Bogojević: “Measurements of Noise Levels of Freight Train on Serbian Railways”, IX International Conference “Heavy Machinery-HM 2017”, Zlatibor, 28 June – 1 July 2017, E.71 – E.76, ISBN 978-86-82631-89-7 – M33
  96. Milan Kolarević, Branko Radičević, Nicolae Herisanu, Miloje Rajović, Vladan Grković: „Acoustic Properties of Recycled Rubber at Normal Incidence“, IX International Conference “Heavy Machinery-HM 2017”, 28 June – 1 July 2017, Zlatibor, F.23 – F.28, ISBN 978-86-82631-89-7 - M33
  97. Croccolo, D., De Agostini, M., Fini, S., Olmi, G., Vranić, A., Ćirić-Kostić, S. „A two-factor experimental study on the fatigue response of 15-5 PH stainless steel obtained by powder bed laser fusion“, 3rd International Symposium on Fatigue Design and Material Defects, 19-22 September 2017, Lecco, Italy, pp. 60-61 - M34
  98. Croccolo, D., De Agostini, M., Fini, S., Olmi, G., Bogojevic, N., Ćirić-Kostić, S.: „Effects of machining and heat treatment on the fatigue properties of Maraging steel MS1 produced by DMLS“, 3rd International Symposium on Fatigue Design and Material Defects, 19-22 September 2017, Lecco, Italy, pp.55-56 - M34
  99. Croccolo, D., De Agostinis, M., Fini, S., Olmi, G., Robusto, F., Muharemovic, N., Bogojevic, N., Vranic, A. and Ciric-Kostic, S.: DMLS Built Maraging Steel Fatigue Response Investigated for Different Build Orientations and Allowance for Machining, International Conference on Theoretical, Applied and Experimental Mechanics, Cyprus, Greece, 17-20 June 2018, 2018, (pp. 112-113). Springer, Cham. (https://doi.org/10.1007/978-3-319-91989-8_25), (ISBN: 978-3-319-91988-1) - М33
  100. Croccolo, D., De Agostini, M., Fini, S., Olmi, G., Robusto, F., Ciric Kostic, S., Vranic, A., Muharemovic, N., Bogojevic, N.: “Fatigue Response of as Built DMLS Processed Maraging Steel and Effects of Machining and Heat and Surface Treatments”, 6th International Conference on Integrity - Reliability - Failure -IRF2018, Lisbon/Portugal, 22-26 July 2018, Paper REF: 7125
  101. Croccolo, D., De Agostinis, M., Fini, S., Olmi, G., Robusto, F., Muharemovic, N., Bogojevic, N., Vranic, A. and Ciric-Kostic, S.: Experimental study on the sensitivity of DMLS manufactured Maraging Steel fatigue strength to the build orientation and allowance for machining, Proceedings of the 6th International Conference Integrity-Reliability-Failure (IRF 2018), Lisbon, Portugal, 22-26 July 2018, Paper REF: 7126 (ISBN: 978-989-20-8313-1) – М33
  102. Croccolo, D., De Agostini, M., Fini, S., Olmi, G., Robusto, F., Bogojevic, N., Ciric-Kostic, S.: “How Build Orientation and Thickness of Allowance May Affect the Fatigue Response of DMLS Produced 15-5 PH Stainless Steel”, 6th International Conference on Integrity - Reliability - Failure -IRF2018, Lisbon/Portugal, 22-26 July 2018, Paper REF: 7214
  103. Croccolo, D., De Agostinis, M., Fini, S., Olmi, G., Robusto, F., Ciric Kostic, S., Vranic, A., Muharemovic, N. and Bogojevic, N.: Effects of Machining and Heat and Surface Treatments on as Built DMLS Processed Maraging Steel, International Conference on Theoretical, Applied and Experimental Mechanics, Cyprus, Greece, 17-20 June 2018, 2018, (pp. 110-111). Springer, Cham, doi: 10.1007/978-3-319-91989-8_24), (ISBN: 978-3-319-91988-1) – M33
  104. Ljubomir Lukić, Mirko Đapić, Aleksandra Petrović: „History of CNC Machines in Serbia“, Proc. 37th International Conference on Production Engineering – Serbia, October 25 – 26, Kragujevac, 2018, pp.178-187, ISBN: 978-86-6335-057-1 – M33
  105. Miomir Vukićević, Mišo Bjelić, Goran Miodragović, Marina Ivanović, Mladen Rasinac: „Forms of the Reports From the Testing of Welded Joints (Structures)“, Proc. 37th International Conference on Production Engineering – Serbia, October 25 – 26, Kragujevac, 2018, pp.336-341, ISBN 978-86-6335-057-1 – M33
  106. Jelena Tomić, Nebojša Bogojević, Dragana Šumarac Pavlović, Application of soft computing techniques in prediction of road traffic noise levels, 26th Telecommunications Forum TELFOR 2015, Belgrade, 20-21 November 2018
  107. Jelena Tomić, Nebojša Bogojević, Branko Radičević, Zlatan Šoškić, Application of Genetic Algorithm in Developing of Traffic Noise Prediction Model, 26th International Conference „Noise and Vibration“, Niš, Serbia, 6 - 7 December, 2018
  108. Branko Radičević, Milan Kolarević, Nicolae Herisanu, Mišo Bjelić, Tanja Miodragović, Sound absorption of recycled plastic material, 26th International Conference Noise & Vibration, 6 - 7 December 2018 Niš
  109. Milan Kolarević, Branko Radičević, Vladan Grković, Ivana Ristanović, Marina Ivanović, Acoustic properties of recycled plastic, 26th International Conference Noise & Vibration, 6 - 7 December 2018 Niš
  110. Petrović Aleksandra, Rasinac Mladen, Grković Vladan, Ivanović Marina, An experimental plan for noise analysis and chatter detection in milling depending on the cutting parameters, 26th International Conference Noise & Vibration, 6 - 7 December 2018 Niš
     

Radovi u nacionalnim časopisima (M50)

  1. M.Kolarević, Z.Šoškić, Z.Petrović, B.Radičević, “Noise Protection in Urban Environment-Description of a Project”, Mechanics, Transport Communications, No. 3, pp. IV-69/IV-77 (2011),  PDF
  2. Ljubomir Lukić, Mirko Djapić, “Railway Shipping of the Largest Energy Transformer in the Balkan”, Mechanics-Transport-Communications, No. 3, pp. VI-7/VI-12 (2011),  PDF
  3. Branko Radičević, Zoran Petrović, Slobodan Ivanović, Milan Kolarević, “An Example of Application of Software for Assessment of Reliability Distribution”, Mechanics-Transport-Communications, No. 3, pp. VI-113/VI-117 (2011),  PDF
  4. Nebojša Bogojević, Snežana Ćirić Kostić, Aleksandar Vranić, Zlatan Šoškić, “Calculation of bandwith of a transducer for lateral force acting in wheelsets of railway vehicles”, Mechanics, Transport, Communications, No. 3, p. VI-13/VI-18 (2011)‚  PDF
  5. Momir Praščević, Dragan Cvetković, Darko Mihajlov, "The Uncertainity Sources in Environmental Noise Measurements and the Uncertinity Estimation", Facta Universitatis Series: Mechanical Engineering Vol. 9, No 2, 2011, pp. 183 - 192,  PDF
  6. M.Kolarević, A.Babić, N.Ilić, M.Pljakić: Evaluation of the Quality Level of Simultaneously Designed Specific Products for Variant Processing of Infrastructure Profiles, IMK-14 - Research & Devolpment 19(2012)2, EN57-62  PDF
  7. Milan Kolarević, Aranđel Babić, Nemanja Ilić, Marina Pljakić, "Application of the multiple criteria decision-making for comparison of cutting wheels features", Facta Universitatis Series: Mechanical Engineering Vol. 10, No 1, 2012, pp. 15 - 30  PDF
  8. Giangiacomo Minak, Snežana Ćirić Kostić, Zlatan Šoškić, Nenad Radović „Equivalent Stiffness as Measure of Low Velocity Impact Damage of Complex Composite Structures“, Facta Universitatis Series: Mechanical Engineering, Vol.10, No 2, 2012 pp. 91 - 104  PDF
  9. Z.Šoškić, "Design of database of urban noise sources", Mechanics, Transport, Communications, Volume 10, pp.UK-7.1-7.9 (2012)  PDF
  10. Nebojsa Bogojevic, "Optical systems for 3D scanning", Mechanics, Transport, Communications, Volume 10, pp. UK-7.20-7.26 (2012)  PDF
  11. Vladan Grković, Milan Kolarević, Miomir Vukićević, Mišo Bjelić, Automatic Configuration of Modular Vault Walls, Facta Universitatis, Series Architecture and Civil Engineering, Vol 10, No 3, 2012, pp. 291-300, DOI: 10.2298/FUACE1203291G
  12. Nebojša Bogojević, Vojkan Lučanin, Bojan Tatić, Influence Of Wheel Profiles On Rolling Contact Fatigue And Wear Rate Of Railway Wheels, Mechanics – Transport – Communications, ISSN 1312-3823, Volume 11, Issue 3, 2013, article No0839, page VI 34 – VI 40
  13. Bogojević Nebojša, Lučanin Vojkan, Model Validation Of A Railway Vehicle With Three Piece Bogie, IMK 14 – Research & Development, Volume 19, Number 3, page EN67 – EN 74
  14. Giangiacomo Minak, Snežana Ćirić Kostić, Zlatan Šoškić, Nenad Radović „Equivalent Stiffness as Measure of Low Velocity Impact Damage of Complex Composite Structures“, Facta Universitatis Series: Mechanical Engineering, Vol.10, No 2, 2012 pp. 91 – 104
  15. Vranić, A., Ćiric-Kostić, S., Šoškić, Z.: „Razvoj procedure za kontrolu kvaliteta lopatice turbine pomoću trodimenzionalnog skeniranja“, IMK-14 – Istraživanje i razvoj, 19(2013)2, SR51-56  PDF
  16. Aleksandar Vranić, Snežana Ćirić Kostić, Zlatan Šoškić: Dimension Control And Measurement Of Turbine Blades By Optical 3D Scanner, Mechanics Transport and Comminications, vol. 11, 3/2013, article No0882, DS 72-DS 79  PDF
  17. Nebojša Bogojević, SIGNAL ANALYSIS TECHNIQUES FOR RAIL VEHICLE MODEL VALIDATION, Mechanics Transport Communications, volume 12, issue 3/2, 2014, article No 1021, pp.XI-20 - XI-26,  PDF
  18. Zlatan Šoškić, METHODOLOGY FOR ANALYSIS OF EFFECTS OF GREENHOUSE GASES REDUCTION BY INTERMODAL SHIFT ON SOUTH-EAST EUROPE CORRIDORS, Mechanics Transport Communications, volume 12, issue 3/2, 2014, article No 1019, pp.XI-8 - XI-14,  PDF
  19. Boban Cvetanović, Miljan Cvetković, Dragan Cvetković, PROCENA RIZIKA PO ZDRAVLJE VOZAČA, OD VIBRACIJA NASTALIH PRI EKSPLOATACIJI TRAKTORA, Univerzitet u Beogradu, Poljoprivredni fakultet, Institut za poljoprivrednu tehniku, Naučni časopis POLJOPRIVREDNA TEHNIKA, Godina XXXIX, Broj 3, 2014., Strane: 21 – 29, UDK: 321.979, ISSN 0554-5587, UDK 631 (059),  PDF
  20. Ljubomir Lukić, Mirko Đapić, Milan Kolarević, Mechanical engineers in economic environment of industrial production, IMK-14 - Istaživanje i razvoj u teškoj mašinogradnji, 19(2013)3, SR97-104, UDK 621 ISSN 0354-6829,  PDF
  21. Zoran Petrović, Marina Pljakić, Branko Radičević, Mišo Bjelić, Design of Noise Protection of Industrial Plants, IMK-14 – Research & Developement in Heavy Machinery 19(2013)4, EN121-126, UDK 621 ISSN 0354-6829,  PDF
  22. M. Kolarević , D. Minić, M. Rajović1, V. Grković1, Zv. Petrović, Selection of the Optimal Mathematical Model of Multiple Regression in the Ternary Mixture Experiments, IMK-14-Research&Development in Heavy Machinery 20(2014)2 EN55-60,  PDF
  23. M. Praščević, D. Mihajlov, D. Cvetković, A, Gajicki, "Assessment of environmental noise by Harmonica index - case study: the city of Niš", Applied Mechanics and Materials Vol. 801, pp 51-59, doi:10.4028/www.scientific.net/AMM.801.51, 2015
  24. J. Tomić, S. Todosijević, B. Radičević, Z. Šoškić, "Calculation of Noise Field in an Urban Area close to a Traffic Overpass-Case Study", Applied Mechanics and Materials, Vol. 801, pp. 60-65, Oct. 2015;  doi:10.4028/www.scientific.net/AMM.801.60
  25. Branko Radičević, Milan Kolarević, Mišo Bjelić, Vladan Grković, Zlatan Šoškić, Noise Protection of an Automobile Scrapyard With Car Crushers – A Case Study, Applied Mechanics and Materials, Vol. 801 (2015), pp 71-76.  doi:10.4028/www.scientific.net/AMM.801.71
  26. Nebojša Bogojević, Aleksandar Vranić, Snežana Ćirić Kostić, Zlatan Šoškić, “Potentials of Modal Shift for GHG Emission Reduction on the Corridor IV I. The Innovative Transport Alternatives” Mechanics Transport Communications, volume 13, issue 3/2, article 1209. Page VII 1 – VII 7, 2015, ISSN 1312-3823 (print) , ISSN 2367-6620 (online)  PDF
  27. Nebojša Bogojević, Bojan Tatić, Jelena Tomić, Zlatan Šoškić, “ Potentials of Modal Shift for GHG Emission Reduction on the Corridor IV II. The Results and Discussion” Mechanics Transport Communications, volume 13, issue 3/2, article 1210. Page VII 8 – VII 15, 2015, ISSN 1312-3823 (print) , ISSN 2367-6620 (online)  PDF
  28. A. Gajicki, V. Babić, M. Praščević, D. Mihajlov, , "ASSESSMENT OF HARMFUL HEALTH IMPACT OF ENVIRONMENTAL NOISE", Facta universitatis, Series: Working and Living Environmental Protection, Vol. 12, No. 1, pp. 9-16, 2015  PDF
  29. Jelena Tomić, Slobodan Todosijević, Nebojša Bogojević, Zlatan Šoškić, "Methodology for verification of software for noise attenuation calclation according to the ISO 9613-2 standard", Facta Universitatis, Series Working and Living Environmental Protection, Vol.12, No.1, pp.29-38 (2015)  PDF
  30. Milan Kolarević, Branko Radičević, Vladan Grković, Zvonko Petrović, „A REALIZATION OF THE SYSTEM FOR MEASURING AIRFLOW RESISTANCE“, FACTA UNIVERSITATIS Series: Working and Living Environmental Protection Vol. 12, No 1, 2015, pp. 83 - 94  PDF
  31. Vranic, A., Ćirić-Kostić, S.: Analysis of Design Parameters Influences on Modal Behaviour of Sandwich Panels, IMK-14 – Research & Developement in Heavy Machinery, 21(2015) 1, pp. EN29-34, (UDC 621, ISSN 0354-6829  PDF
  32. Jelena Tomić, Slobodan Todosijević, Nebojša Bogojević, "Validacija modela železničkog vozila bazirana na poređenju CDF funkcija signala". IMK-14 – Istraživanje i razvoj u teškoj mašinogradnji 21(2015) 2, SR53-60, UDC 621 ISSN 0354-6829;  PDF
  33. Vranić A., Bogojević N., Ćirić Kostić S., Croccolo D., Olmi G., Advantages and Drawbacks of Additive Manufacturing, IMK-14 – Research & Development in Heavy Machinery, Vol.21, 2/2017, pp EN57-62, Kruševac 2017. (ISSN 0354-6829) – M52
  34. Jelena Tomić, Nebojša Bogojević and Zlatan Šoškić, “Application of the Particle Swarm Optimization for Development of a Traffic Noise Prediction Model” Mechanics Transport Communications, volume 15, issue 3/1, article 1477. Page IV 47 –IX 52 (2017) - нaционални часопис Бугарскe
     

Zbornici skupova nacionalnog značaja (M60)

  1. Dragan Cvetković , Dušan Ilić , Maja Cvetković, ZDRAVLJE ČOVEKA U INTERAKCIJI SA AKUSTIČKIM POREMEĆAJIMA U OKRUŽENJU, Izdavači: INSTITUT ZA JAVNO ZDRAVLjE NIŠ, MEDICINSKI FAKULTET NIŠ, SRPSKO LEKARSKO DRUŠTVO PODRUŽNICA NIŠ, Zbornik rezimea 48. DANI PREVENTIVNE MEDICINE, MEĐUNARODNI KONGRES, ISBN 978-86-915991-3-3,  PDF
  2. Boban Cvetanović, Miljan Cvetković, Dragan Cvetković, VIBRACIJE KAO PROFESIONALNI RIZIK PO ZDRAVLjE RATARA U RURALNOJ PROIZVODNjI, Izdavač: VISOKA TEHNIČKA ŠKOLA STRUKOVNIH STUDIJA, U NOVOM SADU, 9. Međunarodno savetovanje Rizik i bezbednosni inženjering, Kopaonik 1-8. februar 2014, str. 92-96,  PDF
  3. Branko Radičević, Ivana Ristanović, Koeficijent apsorpcije materijala od recikliranog gumenog otpada, Zbornik 58. konferencije za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku ETRAN 2014, Vrnjačka Banja, 2 – 5. juna 2014. godine, ISBN 978-86-80509-70-9, pp. AK3.6.1-6,  PDF
  4. Marina Pljakić, Mišo Bjelić, Danica Boljević, Analiza buke u životnojh sredini na teritoriji grada Kraljeva, AK1.7, 59. KONFERENCIJE ETRAN-a, Srebrno Jezero 8– 11. jun 2015. godine
  5. Branko Radičević, Ivana Ristanović, Milan Kolarević, Predviđanje akustičkih osobina materijala od reciklirane gume, Zbornik 59. konferencije za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku ETRAN 2015, Srebrno jezero, 8 – 11. juna 2015. godine, AK2_7
  6. Milan Kolarević, Mišo Bjelić, Miloje Rajović, Branko Radičević, Vladan Grković: „Regression analysis of ternary alloys system“, 8th Symposium on Thermodynamics and Phase Diagrams, Faculty of Technical Sciences, Kosovska Mitrovica, 19-20 June 2017., pp 92-93, ISBN 978-86-80893-71-6 – M64
  7. Milan Kolarević, Violeta Đorđević, Vukadin Milunović, Vladan Grković: „Statistička kontrola procesa sklapanja sigurnosnih blagajni“, Scientific Conference with International Participation - ETIKUM 2017, December 06-08, Novi Sad, 2017, pp. 33-36, ISBN 978-86-6022-00-68 – M63
  8. Snežana Ćirić Kostić, Jelena Tomić, Tommaso Maria Brugo, Nenad Drvar, "Primena optičke DIC merne metode na projektu A_MADAM", XXIV konferencija KOMIM-a, 17.10.-19.10.2018, Vrnjačka Banja – M64
     

Doktorske disertacije (M70)

  1. Nebojša Bogojević, "Razvoj metode za ocenu kvaliteta simulacije dinamičkog ponašanja železničkih vozila" ; Odluka Nastavno-naučnog veća Fakulteta za mašinstvo i građevinarstvo u Kraljevu Univerziteta u Kragujevcu broj 331/2 od 24. 03 2015. godine; Odbranjena 04. 05. 2015. godine; Uža naučna oblast: Železničko mašinstvo i ispitivanje konstrukcija, Mentor: Prof. dr Vojkan Lučanin, Mašinski fakultet Univerziteta u Beogradu
  2.  Jelena Tomić, master inženjer elektrotehnike i računarstva: „Primena soft computing tehnika za predviđanje nivoa buke drumskog saobraćaja“, odbranjena 14.2.2018. godine na Elekrotehničkom fakultetu Univerziteta u Beogradu; uža naučna oblast: Tehnička akustika, mentor: prof. dr Dragana Šumarac Pavlović

Seminari i predavanja

  1. Seminar o buci urbanih sredina, Kraljevo, 27.12.2011.
    • Z.Šoškić, "Opisivanje buke"  PDF
    • B.Radičevič, "Merenje buke",  PDF
    • N.Bogojević, "Buka saobraćaja",  PDF
    • M.Praščević, "Modeliranje buke urbanih sredina",  PDF
  2. Seminar o zaštiti od buke urbanih sredina, Kraljevo, 21.12.2012.
    • M.Praščević, "Akustičko mapiranje i zoniranje",  PDF
    • Z.Šoškić, "Softver za proračun lokalnih mapa buke"  PDF
    • M. Kolarević, "Razvoj modularnih zvučnih barijera",  PDF
    • Z. Petrović, "Primeri primene zaštite od buke",  PDF
    • S. Todosijević, "Koncepcija Laboratorije za akustička ispitivanja FMG u Kraljevu",  PDF
  3. Predavanje Dr Nikole Holečeka sa Visoke škole za zaštitu čovekove okoline i i ekotehnologije iz Velenja, "Identifikacija buke i redukcija zvučne emisije aparata za domaćinstvo", održano 12.4.2013. u Kraljevu,  PDF